frps.ini

# [common] is integral section
[common]
# A literal address or host name for IPv6 must be enclosed
# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
bind_addr = 0.0.0.0
bind_port = 7000
# udp port used for kcp protocol, it can be same with 'bind_port'
# if not set, kcp is disabled in frps
kcp_bind_port = 7000
# if you want to configure or reload frps by dashboard, dashboard_port must be set
dashboard_port = 7500
# dashboard assets directory(only for debug mode)
dashboard_user = admin
dashboard_pwd = admin
# assets_dir = ./static
vhost_http_port = 8888
vhost_https_port = 8889
# console or real logFile path like ./frps.log
log_file = ./frps.log
# debug, info, warn, error
log_level = info
log_max_days = 3
# auth token
token = xietao
# only allow frpc to bind ports you list, if you set nothing, there won't be any limit
#allow_ports = 1-65535
# pool_count in each proxy will change to max_pool_count if they exceed the maximum value
max_pool_count = 50
# if tcp stream multiplexing is used, default is true
tcp_mux = true

frpc.ini

[common]
server_addr = 47.97.212.84
server_port = 7000
token = xietao

[ssh]
type = tcp
local_ip = 127.0.0.1
local_port = 22
remote_port = 5000

[web]
type = http
local_ip = 192.168.1.104
local_port = 8888
custom_domains = 47.97.212.84